DSL-2640T-Configuration port forwarding

>>> How to configure Port Forwarding DSL-2640T?

Step 1 Connect your PC to the LAN port of your DSL-2604T

Step 2 Start up an Internet explorer and key in 192.168.1.1 (by default)

Step 3 Key in your username and password (by default username is admin password is admin as well)

Step 4 Click on Advance > LAN Clients to assign Static IP to client (s).
**You need to set you PC to static IP***
IP Address: Enter the IP address of the client.
Host Name: Give a name to the application.

Step 5 Click Apply to allow the rules to be created and it will be appearing under Static Address List.

Step 6 Click on Virtual Server > User > Add.

Step 7 Create the rules under Rule Management. Click on the Apply icon.
Rule Name: Application Rule Name
Protocol: Type of protocol (e.g. TCP, UDP or TCP and UDP)
Port Start: Starting Port Number
Port End: Ending Port Number
Port Map: Mapping to the starting port
Port Map End: Mapping to the ending port
Step 8 Click on the Virtual Server to go back to main menu.

Step 9 Click on User under Category.

Step 10 Under LAN IP, select the appropriate IP address which the rules will be applied to Example: 192.168.1.4

Step 11 Under the Available Rules, select the rules and click Add.

Step 12 Rules created will be shown under Applied Rules.

Step 13 Click on Apply.

Step 14 Click on Tools > System > Save and Reboot.
Port Forwarding is rules is completed.